EMP8080 Fibre Laser Tigɛcogo ɲumanba 800*800mm baarakɛcogo hakɛ
EtherCAT bus-based CNC system bɛ dɔ fara kosɛbɛ minɛnw sɛgɛsɛgɛli n’u sɛgɛsɛgɛli kan, ka izini hakilitigiw ni minɛnw kɛ tiɲɛ ye.
O karamɔgɔya bɛ ni marbre jɔcogo ye, min bɛ gɛlɛya ɲuman di ani ka fanga caman di. Crossbeam in dilannen don walasa a ka nɔgɔn, ka teliya baarakɛcogo kabakoma di, wa a bɛ kɛ ni masin ye tigitigi ni CNC gantry fibre laser tigɛlan ye walasa ka lamaga tigitigi ni nɔgɔya.
hali | EMP8080 ye | |
Encodeur linéaire(Fagor) Bamako, Mali. | A ka ɲɛfɔli hakɛ ye 0,5μm ye | |
Marbre (Marbre) ye | 1800*1350*200 ye | |
Yɔrɔw jɔcogo ɲɛnama | 800*690mm ye | |
Max.Acceleration (Teliya) ye | 1,5g ye | |
Baarakɛcogo hakɛ | 800*800mm ye | |
X-Axe (X-Axe) ye | Teliya min bɛ taa teliya la | 60m/min |
Trave (Trave) min bɛ nɔ bɔ | 800mm ye | |
Jiginni tiɲɛni (Tigɛ) . | ±20μm ye | |
Segin-ka-bɔ-yɔrɔ-ko tiɲɛni | ±5μm ye | |
Y-Axe ye | Teliya min bɛ taa teliya la | 60m/min |
Trave (Trave) min bɛ nɔ bɔ | 800mm ye | |
Positioning Accuracy(Tigɛ) . | ±20μm ye | |
Segin-ka-bɔ-yɔrɔ-ko tiɲɛni | ±5μm ye | |
Z-Axis (Axis) ye | Ka taama | 100mm ye |
| Masina bolicogo Lamini | |
| Temp. | -10°C ~ 45°C ye |
| RH | |
| Ambient (yɔrɔ) cogoya | Fiɲɛ bɛ don a la, a tɛ yɛrɛyɛrɛ |
| Kuran sɛnɛyɔrɔ | 380V±10%/3-fasa walima 220V±10%/1-fasa |
| Kuran sɛnɛcogo Frequency. | 50Hz ye |
| Masina fanga sɔrɔli | ≤3000W(chiller &laser tɛ a la) |
Raytools EthreCAT CNC Kunnafoni-falen-falen-minɛn
●Taabolo kunnafonidilan bɛ se ka bonya kosɛbɛ ka da kiliyanw ka ɲininiw kan, ka dɛmɛ don fɛn kɔrɔw ma i n’a fɔ wulu tigɛ, duguma panni, musakabɔli, plɔmu kɔlɔsili, mikro-joints, pre-piercing, multi-level piercing, ani film cutting, ani fɛn wɛrɛw.
● Dakunw dɔnni ani u labɛncogo: O sitɛmu bɛ Auto FindEdge ni Manual FindEdge baarakɛcogo fila bɛɛ di. Auto FindEdge bɛ se ka a yɛrɛ ladilan ni a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ ko a bɛ se ka kɛ. Fɛn wɛrɛ minnu bɛ yen olu ye auto sorting ye, break point cutting, ani se ka filew sorter ka kɛ systeme recognized formats ye (NC walima PART files).
● Tigɛcogo: O siratigɛ bɛ fɛɛrɛ kɛrɛnkɛrɛnnenw dɛmɛ i n’a fɔ nɛnɛyɔrɔ ani kɛrɛ saba tigɛ, o bɛ kɛ sababu ye ka kunnafoni ɲuman ni tiɲɛni kɛcogo ɲuman sabati baara gɛlɛnw senfɛ.
● Bɛnkansɛbɛn: A bɛ Bɛn ni laser sitɛmu suguya caman ye wa a bɛ sira Di bolola G-kode caman caman cili ma walasa ka baara Kɛ ka kɛɲɛ ni mɔgɔw sago ye. Kumaɲɔgɔnya: Baara kɛli ni EtherCAT protocole ye, o sitɛmu bɛ waati yɛrɛyɛrɛ kɔlɔsili sabati ni segin-ka-bɔnye ye min ye milisekɔndi 1 dɔrɔn ye.
● Tiɲɛni ni teliya: O sitɛmu bɛ sira tiɲɛni di 0,005mm ma, jɔyɔrɔ tiɲɛni 0,001mm, ani sigiyɔrɔ tiɲɛni segin-segin 0,002mm. A bɛ Se ka teliyaba Sɔrɔ 3G la, tigɛ teliya min ye 80mm/min ye, ani jalen lamaga teliya min ye 250m/min ye.
● Lakanali fɛɛrɛw: A bɛ doni girinya lakanani ni aksidan girinya kɔlɔsili ye waati yɛrɛ la, o min bɛ baara jɔ ani ka servo alarma lawuli ni ko dɔ kɛra.
● Alarm ani ladonni: Alarm logs bɛ se ka bila ka taa jamana wɛrɛw la walasa ka baarakɛlaw ka ɲɛfɔli kɛ. O sitɛmu fana bɛ ladonni fɛɛrɛw di minnu bɛ se ka baara kɛ ni u ye i n’a fɔ auto calibration ani break point mode.
● Baarakɛcogo: Fɛn minnu bɛ kɛ ka ɲɛ i n’a fɔ close-loop arc detection, olu bɛ dɛmɛ ka baara kɛ waati dɔgɔya, ka sɔrɔ torque monitoring bɛ mechanical meshing lajɛ ni a bɛ se ka kɛ ko a sirilen don walima ni a bɛ se ka lajɔ.
Raytools CNC sitɛmu bɛ sira Di ɲɔgɔndan tigitigi ma laser, motɛriw ani masin yɔrɔ wɛrɛw cɛ. O bɛ na ni tigɛcogo ɲuman ye, kɛrɛnkɛrɛnnenya la, dilancogo gɛlɛnw ni baarakɛcogo minnu bɛ muɲu kosɛbɛ.
Raytools CNC system modular design bɛ sira di sensor, axes, walima périphériques wɛrɛw faralen ɲɔgɔn kan nɔgɔya la. O sɛgɛsɛgɛli in b’a to masin bɛ se ka ladamu tigɛ baara caman na ani siniɲɛsigi yiriwaliw la.
EtherCAT bɛ latency ni jitter dɔgɔyalen min di, o nafa ka bon kosɛbɛ laser tigɛcogo la, yɔrɔ min na waati nafa ka bon. O b’a to laser kun bɛ taa ka ɲɛ ani ka taa a fɛ, o bɛ dɔ bɔ filiw la ani ka tigɛcogo bɛɛ lajɛlen ɲɛ.
Ni kumaɲɔgɔnya ni baarakɛcogo teliyalen don, o masin bɛ se ka baara kɛ ni teliya ye k’a sɔrɔ a ma tiɲɛni kɛ. O bɛ na ni cycle waatiw surunya ye ani ka dɔ fara baarakɛcogo kan.
Ikomi EtherCAT bɛ tali kɛ kosɛbɛ ani ka yiriwa ka taa a fɛ, masin minnu bɛ baara kɛ ni nin fɛɛrɛ in ye, olu bɛ jɔyɔrɔ ɲuman na walasa ka fɛn caman sɛmɛntiya sini ani ka don fɛɛrɛ kuraw la.
Kamera CCD min bɛ se ka kɛ a yɛrɛ sago ye
Yɔrɔw jɔcogo ɲumanba: Ni i y’a suma ni laadala dakun ɲinini fɛɛrɛw ye, CCD yecogo jɔyɔrɔ bɛ se ka tiɲɛni hakɛw sɔrɔ minnu ka ɲi fo ka se milimɛtɛrɛ 0,001 ma, o b’a to a ka ɲi kosɛbɛ masinw dilanni na minnu bɛ se ka kɛ.
Yɔrɔ teliya teliya: Yɛrɛlabɔli siratigɛ bɛ ɲɛfɔli yɔrɔ damadɔ dɔrɔn de wajibiya walasa ka minɛ, o kɔfɛ, CCD algorisimu bɛ teliya ka jatebɔ kɛ fɛn in ka offset angle kan, o bɛ dɔ bɔ kosɛbɛ sigili waati la.
Edge-Finding Fɛɛrɛ min ka fisa ni tɔw ye: A tɛ i n’a fɔ fɛɛrɛ kɔrɔw, CCD ɲɛnayeli jɔyɔrɔ tɛ a ɲini tigɛkun na ka surunya sɛbɛnfura sanfɛla la, o la, tigɛ kunkolo tiɲɛni farati bɛ dɔgɔya.
