EMP6060 Laser tigɛlan tigitigi 600*600mm baarakɛcogo hakɛ
Laser tigɛlan in ka mainframe jɔlen don ni a bɛɛ lajɛlen gɛlɛya ɲumanba ye ani fanga caman. Basi bɛ dilan ni marbre bulu ye, ka sɔrɔ crossbeam dilannen don ni aluminiyɔmu extrudé ye. O faralen ɲɔgɔn kan, o bɛ teliya baarakɛcogo ɲuman sabati ani ka jɔli bɔgɔbɔgɔli bali ka ɲɛ.
Baarakɛcogo ɲumanba ani baarakɛcogo sabatilen:
EMP6060 laser tigɛlan fitinin in bɛ ni gantry ye min bɛ boli siɲɛ fila, wa a bɛ ni guide lineaire ye min bɛ se ka kɛ cogo ɲuman na, min bɛ segin-ka-bɔnye kɛcogo ɲuman di, a tɛ sɛgɛn kosɛbɛ, ani a bɛ baara sabati.
hali | EMP6060 ye | |
Encodeur linéaire(Fagor) Bamako, Mali. | A ka ɲɛfɔli hakɛ ye 0,5μm ye | |
Marbre (Marbre) ye | 1800*1350*200 ye | |
Yɔrɔw jɔcogo ɲɛnama | 600*490,5mm ye | |
Max.Acceleration (Teliya) ye | 1,5g ye | |
Baarakɛcogo hakɛ | 600*600mm ye | |
X-Axe (X-Axe) ye | Teliya min bɛ taa teliya la | 60m/min |
Trave (Trave) min bɛ nɔ bɔ | 600mm ye | |
Jiginni tiɲɛni (Tigɛ) . | ±20μm ye | |
Segin-ka-bɔ-yɔrɔ-ko tiɲɛni | ±5μm ye | |
Y-Axe ye | Teliya min bɛ taa teliya la | 60m/min |
Trave (Trave) min bɛ nɔ bɔ | 600mm ye | |
Positioning Accuracy(Tigɛ) . | ±20μm ye | |
Segin-ka-bɔ-yɔrɔ-ko tiɲɛni | ±5μm ye | |
Z-Axis (Axis) ye | Ka taama | 100mm ye |
| Masina bolicogo Lamini | |
| Temp. | -10°C ~ 45°C ye |
| RH | |
| Ambient (yɔrɔ) cogoya | Fiɲɛ bɛ don a la, a tɛ yɛrɛyɛrɛ |
| Kuran sɛnɛyɔrɔ | 380V±10%/3-fasa walima 220V±10%/1-fasa |
| Kuran sɛnɛcogo Frequency. | 50Hz ye |
| Masina fanga sɔrɔli | ≤3000W(chiller &laser tɛ a la) |
Raytools EthreCAT CNC Kunnafoni-falen-falen-minɛn
●Process database bɛ se ka bonya i n’a fɔ kiliyanw b’a ɲini cogo min na.
●Fly tigɛ, jigin, compensate, lead, micro-joint, pre-pierce, multilevel pierce ani film tigɛ wdfl⋯
●Auto FindEdge, Manuel FindEdge, auto sort ani break point tigɛ, wdfl⋯
●Nɛnɛyɔrɔ ni kɛrɛ saba tigɛlen.
●Auto sort: auto transfert ka kɛ system reconnaissant format ye, auto sorted ani ka generate ka kɛ NC walima PART files ye.
●A bɛ Bɛn ni laser suguya caman ye.
●A bɛ bɛn baarakɛcogo ma ni bolola G kode caman cili ye
●Kumaɲɔgɔnya: EtherCAT protocol control ni waati yɛrɛ la refresh cycle 1ms.
●Tiɲɛni: sira 0,005mm, jɔyɔrɔ 0,001mm, segin-ka-bɔnye 0,002mm.
●Teliya: max. teliya 3G, max. tigɛ 80mm/min, max. lamaga jalen 250m/min.
●Lakanali : doni tɛmɛnen lakanani ka se axis moment ma, kɔlɔsili waati yɛrɛ la ka se axis moment ma ka jɔ ani ka servo alarm upload.
●FindEdge: Auto FindEdge ani Manuel FindEdge (Auto FindEdge bɛ se ka angle wuli a yɛrɛma ni nɛgɛfɛnw ka angle deviation dɔɔnin kɔlɔsili ye).
●Alarm: alarm log export ka ɲɛsin baarakɛla ma.
●Teriya ladonni: auto calibration ani break point mode.
●Komisiyɔn: close-loop arc detection feature walasa ka komisiyɔn waati lakana. Torque monitoring feature walasa ka masin meshing cogoya dɔn ni a sirilen don kojugu walima ni a lafiyalen don.
EtherCAT bus-based CNC system jɔyɔrɔ ka bon izini baarabolo caman na wit rmance (rmance) ye. Ni fɛɛrɛ kuraw bɛ senna, EtherCAT bɛna jɔyɔrɔba ta ka tɛmɛn fɔlɔ kan, izini otomatiki nataw la.
Kamera CCD min bɛ se ka kɛ a yɛrɛ sago ye
-
Jɛkuluw ka baarakɛcogo Baarakɛcogo ni baarakɛcogo tɛ minnu na, olu bɛ sɔrɔ kuluw sigicogo la. Ni a kɛra cogo wɛrɛw la, a bɛ dɛmɛ kosɛbɛ walasa ka sumaya fili min bɛ se ka nɔ bila tigɛcogo ɲuman na.
-
CCD visual system bɛ jaw baara porogaramuw fɛ minnu bɛ dɛmɛ don ka ja sɛgɛsɛgɛ baarakɛminɛnw fɛ.
Kamera yelen kɛli walasa ka ja ni misali sɛgɛsɛgɛ walasa ka taamasiyɛn yɔrɔw nɔfɛtaama.
Otomatiki doni ni jigin baara bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye
