4-in-1 thli-lumtermi kut in tlaihmi laser welder 1kw in 1.5kw tiang
Hmai chung thil
A fawimi hman khawhmi aa fonhmi suaisamnak. Wobble welding nih seam ah welding tuah khawhnak a tthanchoter. Hmannak hmun kauhternak caah wire feeder aa tel.
Nozzle cu riantuannak thilri in a chuah tik ah auto beam off riantuannak he himnak kilvennak phunphun.
“4-in-1 riantuannak” (Weld/Cut/WeldSeam Clean/Remote Clean). Laser riantuannak lu in tip pumhnak sining thlennak rang tein.
Wobble welding nih lumnak kha aa tluk tein phawtzamhnak, luh khawhnak a tthanchoter, cun tlamtlin lonak a zorter.
A tthanchomi luh khawhnak: Laser ceunak a tthawnnak nih a luh khawhnak a bawmh khawh, a hlei in thilri a thuk deuhmi ah asiloah aa lo lomi thir pawl an hren tikah.
Tlawmtermi thlennak: Lungthawhnak kha tlukruang deuh in phawtzamhnak thawngin, wobble laser hrenhnak nih hrennak hmun ah a rawkralnak kha a zorter khawh.
A tthanchomi ruhro tthatnak: Mah thiamnak nih a nem deuhmi, aa khat deuhmi hrenhnak a chuahter khawh i a tlamtlinlonak a tlawm deuh, cu hna cu a tlongmi asiloah a tlawm deuhmi a si.
A phunphun in hman khawhnak: Wobble laser welding cu fiber laser, CO2 laser, le solid-state laser hna telh in laser source phunphun he hman khawh a si.
aa khat | RayEdge-1000A | RayEdge-1200A | RayEdge-1500A |
Laser | Maxphotonics | ||
Laser Thazaang | 1000w | 1200w | 1500w |
Laser Wavelength | 1080nm | ||
Fiber sauhnak | 10m | ||
Fiber Core | 20μm | ||
Hnawmhnak rangnak | 0-20mm/s | ||
Hnawmhnak phun | Wobble(axis pakhat) | ||
Wobbling Range | 0-5mm (Weld)/0-10mm (WeldSeam Clean)/0-80mm (Remote Clean) | ||
Welding Seam Kauhnak | A tam bik.5mm | ||
Hnawmhnak a thuhnak | A tam bik.2mm | A tam bik.2.5mm | A tam bik.3mm |
Khuasik | Thli lumternak | ||
Khuhnak thlalang | φ20mm*3mm | ||
Collimation Length | 60mm | ||
Focus Length | 150mm | ||
aa khat | RayEdge-1000A | RayEdge-1200A | RayEdge-1500A |
Thazaang Peknak | 220V/Single Phase/50 or 60Hz | ||
A dihlak in tahfung | 480x700x700 | ||
Rihnak | |||
Phurhchanhnak Tahfung | 580x800x750mm | ||
Wire feeder | Aa telmi | ||
Hri Diameter | 0.8/1.0/1.2/1.6mm | ||
Rawl peknak rangnak | 0.1-18m/min | ||
Hri thilri | SS/AL Magnesium/Copper | ||
A dihlak in tahfung | 440x250x580mm | ||
Phurhchanhnak Tahfung | 470×310x620mm | ||
Rihnak | 14kg | ||
Phurhchanhnak Tahfung | ~15kg | ||
Theihternak um loin thlen khawh a si. | |||